Seed Hawk TOOLBAR 2009 - Manual (Page 12)

Seed Hawk Manual Tool Bar Page 9
2.4 MAINTENANCE SAFETY
• Read and understand all information provided in this Operator’s Manual covering
operation, adjustment, maintenance and repair prior to performing any of these
tasks.
• Plan work to ensure proper tools, equipment and personal protective equipment
is available prior to working on implement.
• Wear appropriate clothing when performing tasks around the implement. Ill-fitting
and/or frayed clothing as well as loose or dangling items should not be worn
when working near the implement.
• Stop the engine, lower the implement, set the parking brake, remove the ignition
key, and allow time for moving parts to stop prior to adjusting, maintaining or
repairing the implement.
• Ensure that all moving parts have come to a complete stop before performing
adjustments, maintenance or repairs.
• Ensure that hydraulic oil pressure in hoses, lines and components is fully relieved
prior to performing maintenance or repairs to the hydraulic system.
• Ensure that wings are either fully lowered or fully raised and secured with their
safety chains or securely block the wings if raised to perform adjustment,
maintenance or repairs.
• Securely block main frame and/or wings if adjustment, maintenance or repair is
required for wheels and tires.
• Wear personal protective equipment, such as gloves, eye protection, etc. when
inspecting hydraulic system for leaks. Use a small piece of cardboard or wood to
detect leaks.
• Ensure that all guards and shields are intact and in place after performing
adjustment, maintenance or repairs prior to operating implement.
• Store flammable fluids in approved containers and store out of access by
unauthorized persons, especially children.