Seed Hawk Hydraulic Drive 2010 Calibration Guide - Manual (Page 4)

Seed Hawk
®
Manual Calibration Guide
3
To begin the remote calibration of the meters mount the remote
calibration console on the ram-ball and attach the electrical
connector. Turn the console on using the blue power button.
After turning on the remote calibration console displays the bin
selection screen. Using the soft keys select the bin which
corresponds to meter to be calibrated and press enter.
This will bring up the calibration screen for that particular bin.
SETUP brings up an additional menu with supplementary
options. Pressing BEGIN will start the calibration process.