Seca 285 - Manual (Page 116)

116 •
Enable/disable wireless
module (system)
The device is supplied with the wireless module
activated. Power consumption is increased with the
wireless module activated. You can disable the wireless
module if you do not wish to use the wireless data
transmission option.
1. Switch the device on.
2. Select the "SYS" menu item from the "rf" submenu.
3. Confirm the selection.
The current setting is displayed.
4. Select the setting you require
– On
– Off
5. Confirm the selection.
You will leave the menu automatically.
Select print option
(APrt)
You can configure the measuring station so that
measured results are automatically printed out on a
wireless printer logged on to the wireless group.
NOTE
This function is only available if the "learn"
function has been used to integrate a
seca wireless printer in the wireless group.
1. Switch on the head slide and the multifunctional
display.
2. Select the "APrt" menu item from the "rf" submenu
and confirm your selection.
3. Depending on the required print result, select the
appropriate setting for head slide and
multifunctional display.
4. Confirm your selection.
You will leave the menu automatically.
Print result
APrt head
slide
APrt
multifunctional
display
Height on off
Weight off MA
Height, weight and
BMI/BFR
off HI_MA
No automatic
printing
off off