Power supply, Setting up and aligning the scales – Seca 764 User Manual
Page 20
20
Power supply
The power supply must come from the
supplied AC adaptor.
The connector for the AC adaptor is locat-
ed under the rod.
Please use only the mains unit sup-
plied or mains units from the seca
range of accessories. Before plugging
the unit into the socket, check wheth-
er the mains voltage marked on the
mains unit matches local mains volt-
age.
4. Setting up and aligning the scales
– Place the scales on a level surface.
– Align the scales by screwing the foot
screws. The air bubble in the spirit level
must be right in the centre of the circle .
The scales must stand securely on the
floor on all four feet.
Important!
The alignment of the base of the scale
must be checked and corrected if nec-
essary every time the location of the
scale is changed.