Seca 233 - Manual (Page 8)

8
2. Using your right hand, push the foot sup-
port (2) in the direction of the baby’s feet,
placing the baby’s feet on the bearing sur-
face of the foot support. Keep the baby
still on the weighing tray with the left hand.
3. With the left hand, gently press the baby’s
knees down onto the weighing tray and
with the right, push the foot support (2) to
the soles of the baby’s feet. Read off the
length of the baby from the marking on
the measuring rule guide (3).
Cleaning
Clean the measuring rod as required using
a domestic cleaning agent or commer-
cially-available disinfectant. Follow the
manufacturer’s instructions.
packaging just as it was when originally packed. All the
packaging should therefore be retained.
A claim under warranty will not be honoured if the
equipment is opened by persons not expressly
authorised by seca to do so.
We would ask our customers abroad to contact their
local sales agent in the event of a warranty matter.
Declaration of conformity
Mechanical equipment for measuring
length
seca model 233
Batch no.: see back of measuring rod
The measuring rod satisfies the basic
requirements of Directives 93/42/EEC and
2007/47/EC pertaining to medical devices.
Hamburg, August 2013
Frederik Vogel
– CEO Development and Manufacturing –
seca gmbh & co. kg
Hammer Steindamm 9-25
22089 Hamburg
Germany
Phone: +49 40.200 000-0
Fax: +49 40.200 000-50
: www.seca.com
Technical data
Measurement range: 350-800 mm /
14 - 32 inches
Graduations: 1 mm / 1/8 inch
Accuracy: greater than +_ 5 mm
Dimensions
(W x H x D): 641 mm x 179 mm x
296 mm
Weight: approx. 700 g
Temperature range: +10 °C to +40 °C
Directive 93/42/EEC: Class I with measuring
function
Disposal
Should the measuring rod no longer be able
to be used, the responsible waste disposal
association will be glad to give you infor-
mation about the measures necessary to
dispose of it properly.
Warranty
A two-year warranty from date of delivery applies to
defects attributable to poor materials or workmanship.
All moveable parts – batteries, cables, mains units,
rechargeable batteries etc. – are excluded. Defects
which come under warranty will be made good for the
customer at no charge on production of the receipt. No
further claims can be entertained. The costs of transport
in both directions will be borne by the customer should
the equipment be located anywhere other than the
customer’s premises. In the event of transport damage,
claims under warranty can be honoured only if the
complete original packaging was used for any transport
and the merchandise secured and attached in that
2
3