SANDPIPER EB1-M - Manual (Page 6)

Repair Parts shown in bold face (darker)
type are more likely to need replacement
after extended periods of normal use.
They are readily available from most
Warren Rupp distributors. The pump
owner may prefer to maintain a limited
inventory of these parts in his own stock to
reduce repair downtime to a minimum.
IMPORTANT: When ordering repair parts
always furnish pump model number, serial
number and type number.
Model EB1-M Page 6 520-031-000 8/00
MATERIAL CODES
The Last 3 Digits of Part Number
000... Assembly, sub-assembly; and some
purchased items
010... Cast Iron
015... Ductile Iron
025... Music Wire
080... Carbon Steel, AISI B-1112
110... Alloy Type 316 Stainless Steel
112... Alloy “C”
114... 303 Stainless Steel
115... 301/302/304 Stainless Steel
120... 416 Stainless Steel (Wrought Martensitic)
148... Hardcoat Anodized Aluminum
150... 6061-T6 Aluminum
151... 6063-T6 Aluminum
154... Almag 35 Aluminum
155 or 156...356-T6 Aluminum
157... Die Cast Aluminum Alloy #380
159... Anodized Aluminum
162... Brass, Yellow, Screw Machine Stock
170... Bronze, Bearing Type, Oil Impregnated
180... Copper Alloy
330... Plated Steel
331... Chrome Plated Steel
332... Electroless Nickel Plated
335... Galvanized Steel
354... Injection Molded #203-40 Santoprene —
Duro 40D +/-5; Color: RED
356... Hytrel
357... Rupplon (Urethane Rubber)
360... Buna-N Rubber. Color coded: RED
363... Viton (Fluorel). Color coded: YELLOW
364... E.P.D.M. Rubber. Color coded: BLUE
365... Neoprene Rubber. Color coded: GREEN
366... Food Grade Nitrile. Color coded: WHITE
375... Fluorinated Nitrile
405... Cellulose Fibre
408... Cork and Neoprene
425... Compressed Fibre
440... Vegetable Fibre
500... Delrin 500
501... Delrin 570
520... Injection Molded PVDF, Natural Color,
Food Grade/USDA Acceptable
540... Nylon
550... Polyethylene
551... Polypropylene
555... PVC (Polyvinyl Chloride)
580... Ryton
600... Teflon (virgin material) Tetrafluoroethylene (TFE)
603... Blue Gylon
604... Teflon — Diaphragm
610... Encapsulated Silicon
611... Teflon Encapsulated Viton
Delrin, Teflon, Hytrel, and Viton are
registered tradenames of E.I. DuPont.
Gylon is a registered tradename of Garlock, Inc.
Warren Rupp, Rupplon, and SandPIPER are registered
tradenames of Warren Rupp, Inc.
Ryton is a registered tradename of Phillips
Chemical Company.
Loctite is a registered tradename of Loctite Corporation.
ITEM TOTAL
NO. PART NUMBER DESCRIPTION RQD.
30 900-003-330 Washer, Lock (Non-overlay) 2
31 675-040-360 Ring, Sealing (Aluminum Center) 2
32 685-039-120 Rod, Diaphragm 1
33 132-019-360 Bumper 2
34 612-023-330 Plate, Outer Diaphragm 2
612-023-110 Plate, Outer Diaphragm 2
34A 612-067-110 Plate, Outer Diaphragm (Used with
Teflon Diaphragm Overlay) 2
612-101-112 Plate, Outer Diaphragm Assembly 2
34B 807-048-330 Stud (Use with 612-101-112) 2
35 612-022-330 Plate, Inner Diaphragm 2
36 286-008-365 Diaphragm 2
286-008-363 Diaphragm 2
286-008-360 Diaphragm 2
286-008-364 Diaphragm 2
286-008-356 Diaphragm 2
286-008-354 Diaphragm 2
37 722-045-365 Seat, Valve 4
722-045-360 Seat, Valve 4
722-045-600 Seat, Valve 4
38 050-019-365 Ball, Check Valve 4
050-019-360 Ball, Check Valve 4
050-024-600 Ball, Check Valve 4
39 518-041-010 Manifold, Suction 1
518-041-110 Manifold, Suction 1
518-041-112 Manifold, Suction 1
40 518-042-010 Manifold, Discharge 1
518-042-110 Manifold, Discharge 1
518-042-112 Manifold, Discharge 1
41 170-029-330 Capscrew, Hex Head 28
42 901-039-330 Washer, Flat 12
43 545-004-330 Nut, Hex 16
44 618-003-330 Pipe, Plug 3
45 618-003-330 Pipe, Plug 2
618-003-110 Pipe, Plug (SS Pumps Only) 2
618-003-112 Pipe, Plug 2
46 196-057-010 Chamber, Outer 2
196-057-112 Chamber, Outer 2
196-057-110 Chamber, Outer 2
47 530-018-000 Muffler, Exhaust 1
48 312-044-555 45° Elbow 1
49 538-025-555 Nipple, Close 1
50 560-030-360 O-Ring (SS Pumps Only) 2
560-030-363 O-Ring (SS Pumps Only) 2
51 132-022-360 Bumper, Actuator 2
53 901-035-330 Washer, Flat 1
NOT SHOWN:
031-030-000 Valve Body Assembly
(Consists of items 1, 2, 3, 4 & 5) 1