SANDPIPER PB1-A - Manual (Page 6)

ITEM TOTAL
NO. PART NUMBER DESCRIPTION RQD.
1 114-009-551 Intermediate Bracket 1
2 618-003-110 Pipe Plug 1
3 170-043-115 Capscrew, Hex Head 6
4 560-040-360 O-Ring 2
5 360-056-360 Gasket 1
6 710-009-115 Screw, Self-Tapping 6
7 095-074-000 Pilot Valve Body Assembly* 1
7-A 095-071-551 Pilot Valve Body 1
7-B 755-025-000 Sleeve (with O-Ring) 1
7-C 560-033-360 O-Ring (Sleeve) 4
7-D 775-014-000 Spool (with O-Ring) 1
7-E 560-023-360 O-Ring (Spool) 4
7-F 675-037-080 Retaining Ring 1
8 360-057-360 Gasket 1
9 675-043-115 Ring, Retaining 2
10 170-033-115 Capscrew, Hex Head 4
11 165-042-551 Cap, Valve Body 1
12 360-058-360 Gasket 1
13 095-051-551 Body, Spool Valve 1
14 031-039-000 Sleeve & Spool Set 1
15 560-058-360 O-Ring 8
16 165-038-356 Cap, End 2
17 901-035-115 Washer 7
18 170-063-115 Capscrew, Hex Head 1
19 901-005-115 Washer, Flat 4
20 542-001-115 Nut, Square 1
21 196-055-551 Chamber, Inner 1
22 196-054-551 Chamber, Inner 1
23 620-007-114 Plunger, Actuator 2
24 675-040-360 Ring, Sealing 2
25 360-055-360 Gasket, Bearing 2
26 070-027-501 Bearing, Sleeve 2
27 670-031-551 Retainer, Bearing 2
28 135-013-162 Bushing 2
29 560-001-360 O-Ring 2
30 675-042-115 Ring, Retaining 2
31 720-010-375 Seal, U-Cup 2
32 685-039-120 Rod, Diaphragm 1
33 132-019-360 Bumper 2
34 612-022-330 Plate, Inner Diaphragm 2
35 286-031-365 Diaphragm 2
286-031-360 Diaphragm 2
286-031-363 Diaphragm 2
286-031-364 Diaphragm 2
36 286-035-604 Overlay, Diaphragm 2
37 612-089-551 Plate, Outer Diaphragm 2
* Available in kit form.
Order P/N 031-060-000 which also includes items 5, 7, 8, 12, 23 & 55.
Repair Parts shown in bold face (darker)
type are more likely to need replacement
after extended periods of normal use.
They are readily available from most
Warren Rupp distributors. The pump
owner may prefer to maintain a limited
inventory of these parts in his own stock to
reduce repair downtime to a minimum.
IMPORTANT: When ordering repair parts
always furnish pump model number, serial
number and type number.
REPAIR PARTS LIST and DRAWING
Model PB1-A
Type 3
Warren Rupp, Inc., A Unit of IDEX Corp • P.O. Box 1568 • Mansfield, Ohio 44901-1568 USA • (419) 524-8388 • Fax (419) 522-7867
520-032-000 5/99 PB1-A Type 3 Page 6
MATERIAL CODES
The Last 3 Digits of Part Number
000... Assembly, sub-assembly; and some
purchased items
010... Cast Iron
015... Ductile Iron
025... Music Wire
080... Carbon Steel, AISI B-1112
110... Alloy Type 316 Stainless Steel
112... Alloy “C”
114... 303 Stainless Steel
115... 301/302/304 Stainless Steel
120... 416 Stainless Steel (Wrought Martensitic)
148... Hardcoat Anodized Aluminum
150... 6061-T6 Aluminum
151... 6063-T6 Aluminum
154... Almag 35 Aluminum
155 or 156...356-T6 Aluminum
157... Die Cast Aluminum Alloy #380
159... Anodized Aluminum
162... Brass, Yellow, Screw Machine Stock
170... Bronze, Bearing Type, Oil Impregnated
180... Copper Alloy
330... Plated Steel
331... Chrome Plated Steel
332... Electroless Nickel Plated
335... Galvanized Steel
354... Injection Molded #203-40 Santoprene —
Duro 40D +/-5; Color: RED
356... Hytrel
357... Rupplon (Urethane Rubber)
360... Buna-N Rubber. Color coded: RED
363... Viton (Fluorel). Color coded: YELLOW
364... E.P.D.M. Rubber. Color coded: BLUE
365... Neoprene Rubber. Color coded: GREEN
366... Food Grade Nitrile. Color coded: WHITE
375... Fluorinated Nitrile
405... Cellulose Fibre
408... Cork and Neoprene
425... Compressed Fibre
440... Vegetable Fibre
500... Delrin 500
501... Delrin 570
520... Injection Molded PVDF, Natural Color,
Food Grade/USDA Acceptable
540... Nylon
550... Polyethylene
551... Polypropylene
555... PVC (Polyvinyl Chloride)
580... Ryton
600... Teflon (virgin material) Tetrafluoroethylene (TFE)
603... Blue Gylon
604... Teflon — Diaphragm
610... Encapsulated Silicon
611... Teflon Encapsulated Viton
Delrin, Teflon, Hytrel, and Viton are
registered tradenames of E.I. DuPont.
Gylon is a registered tradename of Garlock, Inc.
Ryton is a registered tradename of Phillips
Chemical Company.
Loctite is a registered tradename of Loctite Corporation.
®