SANDPIPER M15 Metallic - Manual (Page 14)

m15mdl1sm-rev0713 Model M15 Metallic Page 12
Composite Repair Parts Drawing
476-227-000 AIR END KIT (Use With Aluminum Center)
Air Valve Assembly, Pilot Valve Assembly, Seals, Bumpers,
Gaskets, Plunger and O-rings.
476-227-010 AIR END KIT (Use With Cast Iron Centers)
476-227-110 AIR END KIT (Use With Stainless Steel Centers)
476-170-558 AIR END KIT (Air Valve with Stroke Indicator Pin, Aluminum Center)
Seals, O-ring, Gaskets, Retaining Rings, Air Valve
Sleeve and Spool Set, and Pilot Valve Assembly.
476-182-360 WET END KIT
Nitrile Diaphragms, Balls, and Polyethylene Seats.
476-182-354 WET END KIT
Santoprene Diaphragms, Balls and Polyethylene Seats.
476-182-365 WET END KIT
Neoprene Diaphragms, Balls, and Polyethylene Seats.
476-182-633 WET END KIT
FKM Diaphragms, PTFE Balls and Seats.
476-182-635 WET END KIT
Neoprene Diaphragms, PTFE Overlay, Balls and Seats.
476-182-364 WET END KIT
EPDM Diaphragms, Balls and UHMW Seats.
476-182-654 WET END KIT
Santoprene Diaphragms, PTFE Overlay, PTFE Balls,
PTFE Seats.
476-182-659 WETTED END KIT
One-PIece Bonded PTFE/Nitrile Diaphragm,
PTFE Balls, PTFE Seats.
475-215-000 MIDSECTION CONVERSION KIT
(Replaces Aluminum Midsection With Cast Iron
Components.) Air Inlet Cap, Intermediate Bracket,
Inner Chambers and Inner Diaphragm Plates.
HARDWARE KITS
475-205-330 Zinc Plated Capscrews, Washers, and Hex Nuts
475-205-115 Stainless Steel Capscrews, Washers, and Hex Nuts
**
ELECTRONIC LEAK DETECTOR KITS
032-040-000 100VAC
032-037-000 220VAC
Torque
90 in. lbs.
Torque:
Plate to Rod
360 in. lbs.
Torque: Plate to Plate
480 in. lbs.
600 in. lbs. Santoprene
Torque:
360 in. lbs. Aluminum
and Stainless Steel,
500 in. lbs. Cast Iron
Torque
90 in. lbs.
Overlay Diaphragm Option
One-Piece Bonded
Diaphragm Option
AVAILABLE SERVICE AND CONVERSION KITS
** Note: Pumps equipped with these components are not ATEX compliant.