SANDPIPER DSB1 - Manual (Page 11)

MODEL DSB1-3A TYPE TF-4-SS
3-A STANDARD AND USDA ACCEPTED FOR DAIRY APPLICATIONS
Certain wetted components are changed to comply with USDA Dairy Division requirements.
Use of model DSB1-A without an electronic leak detector assembly voids the USDA DAIRY
ACCEPTANCE. Usage of this control device is mandatory for acceptance in USDA
Accepted Dairy Operations.
Change the following:
ITEM 28 CHANGE TO P/N 196-072-113
ITEM 34 CHANGE TO P/N 612-110-113
ITEM 36 CHANGE TO P/N 286-039-366
ITEM 39 CHANGE TO P/N 518-048-113
ITEM 40 CHANGE TO P/N 518-049-113
ITEM 41 CHANGE TO P/N 312-065-113
ITEM 42 CHANGE TO P/N 312-056-113
ITEM 48 CHANGE TO P/N 542-008-000
ELECTRONIC LEAK DETECTOR ASSEMBLY is required to maintain USDA-DAIRY ACCEPTANCE.
13
14
25
31
3
16
47
35
45
49
7
38 20
43
9 40
30
1
24
23
42
37
36
12
50
11
50
15
40
5
4
10
48
44
8
41
39
29
32
19
27
34
21
2
46
17
33
2
46
22
34
26
18
28
32
6
Service & Repair Kits
475.283.000 Air End Conversion Kit
(Converts from a Conductive Polypropylene Air
Valve Assembly to the Die Cast Aluminun Air Valve
Assembly) Valve Body Assembly, Gaskets, and
Longer Capscrews
475.284.379 Wet End Conversion Kit
(Converts to Ribbed Check Valve Seats and
Thicker Gaskets) Check Valve Seats, Conductive
Nitrile Gaskets, and Longer Capscrews
sb1dl5sm-rev0614
sandpiperpump
.
com Model SB1 & SB25 •
8
3: EXP
VIEW