RotoZip CR18L - Manual (Page 14)

The battery pack may be used even though the
light may still be blinking. The light may require
more time to stop blinking depending on
temperature.
The purpose of the green light is to indicate that
the battery pack is fast-charging. It does not
indicate the exact point of full charge. The light
will stop blinking in less time if the battery pack
was not completely discharged.
If the green indicator light is “ON”, the battery
pack cannot accept a charge.
• Check to make sure the battery pack is
inserted into the charger properly.
• Clean the contacts of the charger or battery
pack (e. g. by inserting and removing the
battery several times) or replace the battery
pack, as required.
When the battery pack is fully charged, unplug
the charger (unless you're charging another
battery pack) and slip the battery pack back into
the tool.
BATTERY
PACK
CHARGER
GREEN LIGHT
FIG. 12
-14-
RZ 2610955692 11-08:RZ 2610955692 11-08 11/10/08 9:25 AM Page 14