RIKON Power Tools 10-340 - Manual (Page 5)

5
Unpacking and Checking Contents
Model 10-340 18” Bandsaw is shipped complete
in one box.
1. Unpacking and Checking Contents
a. Separate all “loose parts” from packaging
materials and check each item with “Table
of Loose Parts” to make sure all items are
accounted for, before discarding any
packaging material.
b. Thread hoist ring into threading hole on top
of Bandsaw frame. This allows the user to
connect a properly secured hoist
mechanism to lift the Bandsaw.
c. With the help of another person or by
installing hoist ring, unbolt the Bandsaw
from the packing pallet. Properly lift the
Bandsaw off the packing pallet and place on
level floor.
d. Remove protective oil that is applied to the
table. Use any ordinary house hold type
grease and spot remover.
e. Apply a coat of paste wax to the table to
prevent rust. Wipe all parts thoroughly with a
clean dry cloth.
TABLE OF LOOSE PARTS
Item Part Name Qty
A Bandsaw Assembly 1
B Table w/insert 1
C Rip fence Assembly 1
D Front guide rail 1
E Rear guide rail 1
F Owner’s manual 1
G Box of loose parts 1