RIKON Power Tools 25-200 - Manual (Page 3)

1. General Information
1.1 FOREWORD
This manual must be read and understood before operating the machine. This will provide a better working knowledge of the
machine, for increased safety and to obtain the best results.
2. Machine Description
2.1 MACHINE IDENTIFICATION
There is a identification plate attached to the rear of the machine, containing machine data and serial number.
2.2 GETTING TO KNOW YOUR PLANER/JOINTER
1 Dust chute
2 Jointer fence
3 Infeed table
4 Height setting of infeed table
5 Cutterblock
6 On/off switch
7 Locking level
8 Outfeed table
9 Cutterhead guard
10 Height setting of the planer bed
2
4
6
8
3
10
5
1
9
7
3