RIKON Power Tools 10-350BAL - Manual (Page 5)

5
Model 10-350 14” Professional Bandsaw is shipped complete in one crate. Model 10-350BAL is
shipped in two cartons unless otherwise noted.
Unpacking and Checking Contents
a. Separate all “loose parts” from packaging materials and check each item with “Table of Loose
Parts” to make sure all items are accounted for, before discarding any packaging material.
b. Thread hoist ring into threading hole on top of Bandsaw frame. This allows the user to connect
a properly secured hoist mechanism to lift the Bandsaw.
c. With the help of another person or by installing hoist ring, unbolt the Bandsaw from the packing
pallet. Properly lift the Bandsaw off the packing pallet and place on level floor.
d. Remove protective oil that is applied to the table. Use any ordinary house hold type grease or
spot remover.
e. Apply a coat of paste wax to the table to prevent rust. Wipe all parts thoroughly with a clean
Contents of Package
TABLE OF LOOSE PARTS
Item Part Name Qty
A Bandsaw Assembly 1
B Table w/insert 1
C Owner’s manual 1
D Parts Package 1 1
E Parts Package 2 1
14” Professional Bandsaw
Owner
’s Manual
For more information: www.rikontools.com or [email protected]
For Parts or Questions: [email protected] or 877-884-5167
Record the serial number and date of purchase in your manual for future reference.
Serial number:
Date of purchase:
Part #10-350M1
Models: 10-350/10-350BAL
A B
C
D
E