Acnodes FES 8914 - Manual (Page 27)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FES 8914
Fanless Embedded Controller
CHAPTER 3 PHOENIX-AWARD BIOS UTILITY
The Phoenix-Award BIOS provides users with a built-in Setup program to modify basic system
configuration. All configured parameters are stored in a battery-backed-up RAM (CMOS RAM) to
save the Setup information whenever the power is turned off.
3.1 Entering Setup
There are two ways to enter the Setup program. You may either turn ON the computer and
press immediately, or press the and/or , , and keys simulta-
neously when the following message appears at the bottom of the screen during POST
(Power on Self Test).
TO ENTER SETUP PRESS DEL KEY
If the message disappears before you respond and you still want to enter Setup, please
restart the system to try it again. Turning the system power OFF and ON, pressing the "RE-
SET" button on the system case or simultaneously pressing , , and keys
can restart the system. If you do not press keys at the right time and the system doesn't boot,
an error message will pop out to prompt you the following information:
PRESS TO CONTINUE, OR TO ENTER SETUP