Nature Power Solar Motion Light (22040) User Manual
Page 3
Version 1.1
3
Replacing Batteries
1. Batteries are located in the battery housing at the back of the light.
2. Remove screws from front of the battery housing to access batteries.
3. Replace batteries with rechargeable batteries of the same type and rating. (AA Ni-cd 600mA)
4. Reassemble battery housing.
Maintenance
Ensuring the lamp is kept clean will optimise performance
Clean Solar cell with a damp towel, Do not apply excessive pressure.
Do not use any solvents or cleaning agents on the solar modules.
Replacing the batteries once a year can increase the Solar Motion Light’s lifetime.
Safety Information
Do not install close to flames or flammable gasses
Keep away from children
Do not install on a unstable surfaces/position
Do not stare directly at the lights while they are on
To prevent the unit from falling, install the base unit tightly with expansion screw
Solar Security light, cannot prevent crimes, its invented to alarm use of motion
Do not install in close proximity to other light sources
Limited Warranty
Proof of purchase required
Nature Power warrants to the original purchaser that this product is free from defects in materials and
workmanship for a period of 1 year from date of purchase.
For more information contact:
Nature Power Products
1-800-588-0590
Scan me for more information