Nature Power Lifetime Series Lantern Garden Lights (22076) - Manual (Page 3)

page 3 of 4
Page of 4 3
PARTS LIST
USE AND CARE
•
Do not modify the solar lights in any way. Unauthorized modification may impair
the function and/or safety and could affect the life of the equipment. There are specific applications for which the
solar lights
were designed.
• Always check of damaged or worn out parts before using the solar lights. Broken parts will affect the solar
lights
operation. Replace or repair damaged or worn parts immediately.
• Store idle solar lights. When solar lights are not in use, store it in a secure place out of the reach of children.
Inspect it for good working condition prior to storage.
ASSEMBLY
1. Carefully remove the solar light and all the fittings out of the box.
2. Ensure there is no battery tab in the battery compartment.
3. Let solar light charge for 2 sunny days in the OFF position. Then turn to ON position
4. Attach the lampshade cover to the lamp shade and secure it by turning clockwise.
5. Attach the pole to the bottom of the lamp shade.
6. Slide ground stake into the bottom of pole.
7. Push the stake directly into the ground where it will receive full sunlight.
OPERATION
The performance of the solar lights will vary with the time of year. It will deliver more light when it has had a full day
in the sun rather than a day in overcast weather. Likewise it will deliver longer run time in the summer than winter.
The solar lights must be left to charge in the OFF position for a minimum of 2 sunny days upon purchase before best
results are achieved.
LOCATION OF LIGHTS
For best results, please locate your solar lights in a
position where it can absorb direct sunlight on the solar
panel, and generally free from cover and shade.
Part# Description Qty.
1 Lamp Shade Cover 1
2 Battery 1
3 Lamp Shade 1
4 Pole 1
5 Ground Stake 1