AT&T 3070 - Manual (Page 42)

CALL PICKUP
Use the Call Pickup feature to answer a call that is ringing,
parked, or on hold at another
MERLIN system voice terminal.
You can use the instructions below to program a button for Call
Pickup, or, if you want to save a feature button for another use,
you can use a dial code to pick up a call.
To program: T/P to P ● Touch a button ● Dial * 85
T/P to center
●
●
Intercom
Ring + +
+
To pick up a call using a Call Pickup button:
Touch Intercom-Ring or Intercom-Voice.
Lift your handset.
Touch Call Pickup.
Dial the intercom number of the voice terminal holding the
Call Pickup
●
●
●
●
●
●
●
●
call.
Using a Dial Code
To pick up a call using a dial code:
Touch Intercom-Ring or Intercom-Voice.
Lift your handset.
Dial * 7.
Dial the intercom number of the voice terminal holding the
call.
intercom
number
Intercom
Ring
+ +
+
* 7 intercom
number
41