beautypg.com

Mounting – Nature Power 40 Watt Solar Charge Kit (50042) User Manual

Page 6

background image

Nature Power Products

Nature Power Monocrystalline Solar Cells are manufactured in Germany by Bosch and Solar Panels are assembled in China.

Manual Printed in China

2.

Then connect the black alligator clamp to the black terminal of the second or late battery in the bank,

again matching polarities, negative to negative. This will ensure an equal charging across both or all

batteries.

Connecting an Inverter

An inverter can be used to converting the 12 Volt energy created to 120 Volt Electricity.

Inverter sizes and types vary depending on your power consumptions needs. Please discuss which inverter to

purchase with your Inverter dealer.

Monitoring your Solar System
To confirm that your solar panels are generating power we suggest purchasing a multi-meter. Annual testing

and inspections are recommended to confirm all connections are secure and panels are functioning properly.
Open voltage testing of solar panels may range from 11 Volts up to 21.6 Volts depending on the intensity of the

sun, this is within normal range.
Upon annual inspections it is recommended to wipe all solar panels with a damp towel to remove dust and

debris covering the panels, as layers of dust can affect the solar panel voltage.
Routine Maintenance Check List

Check and replace damaged components if necessary

Clean with a damp towel or cloth remove all debris

Check and maintain the battery electrolyte levels are at regular intervals as per the battery

manufacturer’s recommendations if flooded wet cell lead acid batteries are used

Check solar panel open voltage range

Check solar panel close circuit range

Confirm all wiring connections are secure and tight

Confirm all mounting connections are secure and tight

Mounting

Recommendations

Choose a site for mounting the solar panels that is free from shade and located in an area that receives

maximum sunlight daily. For maximum solar power absorption throughout the day, a tilt-mounting kit is

recommended. Nature Power offers a 40 degree tilt-mounting kit that is sold separately. Contact Nature

Power for information about the tilt-mounting kits.
The solar panels can be permanently installed level using the hardware included. If you choose not to use the

included Z-brackets ensure that you create a ½ inch space between the mounting surface and the solar panel to

allow for proper airflow under the solar panel.
When making connections ensure polarity is maintained, reverse polarity may cause damage and will void the

warranty.
Measure the distance between the mounting site and the battery location. The charge controller should be

mounted in close proximity to the battery bank (within 5 feet). Refer to the DC electrical wire guide to choose

an appropriate gauge wire for the length of the wire.