Johnson Level & Tool Mfg. 40-6005 - Manual (Page 8)

8 ©2013 Johnson Level & Tool - Rev. 1
6. Using the Product
Tip: Place a white sheet of paper over the targeted measuring
surface if error message Err02 occurs to improve the return signal.
Measuring
Measuring Modes
Your Laser Distance Measure has four
measuring modes:
Length
Area/Square
Volume/Cube
Indirect/Pythagoras
Units of Measure
This instrument has seven units of measure. The desired unit of
measure can be set by pressing and holding for two seconds.
The main screen will display square feet/square meters or cubic
feet/cubic meters in a decimal format when calculating area and volume.
The following units can be set:
Distance Area Volume
1. 0.000 m 0.000 m 2 0.000 m 3
2. 0.00 ft 0.00 ft 2 0.00 ft 3
3. 0’0” 1/32 0.00 ft 2 0.00 ft 3
4. 0.00 in 0.00 ft 2 0.00 ft 3
5. 0 1/32 in 0.00 ft 2 0.00 ft 3
6. 0 1/16 in 0.00 ft 2 0.00 ft 3
7. 0 1/8 in 0.00 ft 2 0.00 ft 3
6834H-English_Manuals 4/2/13 1:28 PM Page 8