Johnson Level & Tool Mfg. 40-6683 - Manual (Page 9)

©2012 Johnson Level & Tool 9
Manual Mode LED
LED is flashing: the laser is in manual mode
LED is off: the laser is in self-leveling mode
Power On/Off
Unlock the laser by rotating the compensator lock and on/off switch
from the off (down) position to the on (up) position as shown
below, the laser is on, and the power LED is on.
Lock the laser by rotating the switch to the off (down) position, the
laser is off, and the power LED is off.
Note: Product must be within ± 3° of level for self-leveling feature
to function properly. Greater than ± 3° will result in an alarm
condition (flashing laser and intermittent beeping sound).
Locked Unlocked
6222H_Manuals 10/2/12 8:54 AM Page 9