Johnson Level & Tool Mfg. 40-6004 User Manual

Page 11

Text mode
Original mode

Continuous Measuring
This mode will take continuous
measurements as you move closer or
further away from the target.
Minimum working range is 2-inches.
Maximum working range is 130-feet.

Press and hold the button to activate continuous

measuring mode.

To pause Continuous Measuring mode press or .

To resume Continuous Measuring mode press or to exit

Continuous Measuring mode press .

Minimum / Maximum Measurements
As the laser beam is scanned across
the measuring surface, the
maximum and minimum distance is
simultaneously recorded in the sub
value positions on the screen as the
laser is scanning the targeted surface.

rooms. The same holds true for volume or indirect measurement
modes. Please see each respective measurement section for the
step-by-step instructions.

6833H-English_Manuals 4/2/13 1:26 PM Page 11