Johnson Level & Tool Mfg. 40-6530 User Manual

Page 10

5 and 6. Up/Down button

In continuous scan mode
• Press to increase scan speed
• Press to decease scan speed

In range scan mode

• Press to make the scanned range rotate clockwise
• Press to make the scanned range rotate counterclockwise

Usage for horizontal output status

• Reference “Instrument Usage” previously discussed

Usage for vertical output status
IMPORTANT: Keep “Locking Knob” in the “Locked” position.
1. Install batteries/battery pack as previously discussed.
2. Insert the “Adjusting knob” and place the instrument horizontally

on a stable platform (see fig. 5) or mount it on the tripod with
vertical mount.

3. Turn the “Adjusting Knob” until the bubble is centered.
4. Power on and select

the work state that you
need by pressing the
mode button on the
operating panel.

5. Power the instrument off

when you finish work or
make any movement.

Leveling Vial

Handle

Vertical
Mount

Adjusting
Knob

40-6520_6530 4/20/05 4:12 PM Page 10

This manual is related to the following products:

40-6520