Johnson Level & Tool Mfg. 40-6532 - Manual (Page 9)

©2010 Johnson Level & Tool - Rev. 1 9
2. Place the instrument on a platform or tripod, connect to the tripod
using the 5/8" thread at the bottom of laser.
Note: If instrument is inclined beyond its self-leveling range, it will
deliver an audible alarm. Re-position the instrument until level.
3. Rotate the transportation locking knob counter-clockwise to “ON”,
then turn power on. Press the keys on control panel or remote
control (40-6532 only) to adjust to your desired working status.
4. After finishing operation or before moving the instrument, turn
power off and return locking knob to the “OFF” position.
Note: If transportation locking knob is not turned to the lock position
it will deliver an audible alarm when the unit is returned to its case.
It is important that the locking knob is turned to the locked
position prior to returning the unit to its case.
Note: Remote control operating panel is similar to laser operating panel
(40-6532 only).
Power Key
(turns power off only)
Rotation
speed and
scan keys
Scan Key
High Rotation
Speed Key
3180H_Manuals 2/12/10 11:12 AM Page 9