Operating instructions – Johnson Level & Tool Mfg. 40-6060 User Manual

Page 4

4. Operating Instructions

Battery Installation

1. Make sure the digital level is

turned off.

2. Turn the battery compartment

cover screw counter-
clockwise to remove the cover.
Remove the old batteries, and
install the new batteries.

3. Turn on the level to see if all

functions are correct.

Note:

1. Be sure to match up polarities when replacing the batteries.
2. Always remove the batteries before storing the instrument.

Display after Installing Batteries:

1. After installing new batteries, the LCD will display “good” and

then show “-0-”.

2. Calibrate the instrument as described in self-check & fine

calibration.

IMPORTANT: It is the responsibility of the user to verify the
calibration of the instrument before each use.

5670H-English_Manuals 5/2/12 9:01 AM Page 4