HATZ Diesel 1B50W - Manual (Page 24)

32
Risk of injury!
Wear protective gloves.
– Eliminate deposited matter from the strainer
insert using a suitable steel brush.
– Subsequently, check the strainer insert for
cracks or breaks; if necessary, replace.
– Remount the strainer insert and the clip.
33
– Screw on hexagon nut „1“ by approx. 1 turn.
34
– Insert exhaust manifold with hoop „2“ into
hole, them pull outwards again so that the
hoop is retained.
– Tighten the hexagon nut fully.
2
22