FallTech Shock-Absorbing Lanyards (SAL’s) User Manual
Page 21
41
Heavyweight 8-Series
Max. Capacity: 425 lbs.
Max. Allowable Free-Fall: 6 feet
Max. Arrest Force: 1,350 lbs.
Max. Deceleration Distance: 40 inches
Ultimate Strength: 5,000 lbs.
Connector Gate Strength: 3,600 lbs
Shock Absorber Material: Polyester
Lanyard Leg Material: Polyester – 8,000 lbs
Connector Material: SAE 4130 Alloy Steel
Complies with Standards: Z359.1 (09), Z359.12 (09), Z35913 (09)
A10.32 (04), 1926.502
10.3: Labels and Markings
Fall Indicator Labels
The fall indicator label for Internal, ElasTech, Heavyweight and
Ironman SAL’s are Located at the base of the “scrunched” Shock-
absorber element. In the image below, the top view is of an intact label.
The lower view is from an SAL that has been involved in a fall. If your
indicator label looks like the one in the bottom view, remove the lanyard
from service immediately. See Figure 10.1 below.
Fig 10.1 – Internal SAL Indicator Label
The fall indicator label used in “pack-style” SAL’s such as ClearPack,
SoftPack and WrapTech is concealed inside the shock absorber
element. In the event of a fall the shock-absorber will expand beyond
the protective cover, and the fall indicator label will be visible. This label
is shown on the next page in Figure 10.2.
42
Fig. 10.2 – “Pack-Style” SAL Indicator Label
Product Labels
The label shown in Figure 10.3 below must be present on the product
and must be legible. If it is not, remove the product from service.
Fig. 10.3 – FallTech SAL Product Label