FallTech 7016PC - Manual (Page 20)

39
10.4: Standards and references
Below is a listing of standards that are applicable to the construction
and use of this product. FallTech strongly encourages that all employers
acquire and utilize these documents for the creation of your own fall
protection policies and your individual fall protection plans. Users of this
product should also be familiar with this information as well.
OSHA Standards bear the force of law on a federal level. Some
states have their own regulations which are locally enforced – check with
your State Department of Labor for specific requirements which may be
enforced in your area. OSHA Standards can be accessed for free at
www.osha.gov.
29 CFR 1926 (Subpart M)
1926.500: Scope, Application and Definitions
1926.501: Duty to Have Fall Protection
1926.502: Fall Protection Systems Criteria & Practices
1926.503: Training Requirements
ANSI standards are voluntary consensus standards, and are
generally regarded among the best practices where fall protection is
concerned. Some states have incorporated one or more of the ANSI
standards by reference, meaning that they may be enforced by some
state or local agencies. Check with your State Department of Labor for
further details. ANSI standards are available for purchase through the e-
standards store at www.ansi.org.
ANSI Z359.1-2007: Safety Requirements for Personal Fall Arrest
Systems, Subsystems and Components
ANSI Z359.2-2007: Minimum Requirements for a Comprehensive
Managed Fall Protection Program
ANSI Z359.12-2009: Connecting Components for Personal Fall Arrest
Systems
ANSI A10.32-2004: Fall Protection Systems for Construction and
Demolition Operations
40
10.5: Model Number Listing
This instruction manual pertains to all FallTech Full Body Harnesses
and all FBH components of FallTech Combinations (FBH permanently
joined to a lanyard) including, but not limited to the model numbers in the
listing below.
FT Basic Full Body Harnesses and Combinations – Rated 310 lbs.
6015 7007LTDXS OS7007TB 700756LTRY 70077256LT
6016 7007LTDXL OS7007TBXL 700756LTY3 70077256RY
6017 7007LTD2X OS7007TB2X 700759RY 700789Y3RY
6018 DS7007 OS7007TB3X 7007593RY 7007XLLTY
7007 OS7007 OS7013 70075918RY 7007XL56LT
7007XS OS7007XS OS7013LTD 700759Y3RY 7007XL59RY
7007XL OS7007XL 700704RY 70077204 NT700759RY
7007XX OS70072X 7007043RY 70077256
70073X OS70073X 70072X56LT 70077259
70074X OS70074X 70073X259Y 70077259Y
7007LTD OS7007LTD 700756LTY 70077259Y3
Contractor Full Body Harnesses and Combinations – Rated 310 lbs.
7015 70163X 70173X FD7016 70157259
7015XS 70162K 7018 FD70162X 70157259RY
7015XL 7016PC 7018XS FD70163X 7015XL59RY
70152X 70162XPC 7018XL FD70165020 70152X59RY
70153X 7016QC 70182X GT7016 70152X082D
70153QC 7016QCXL
70183X GT7016XL 70167259RY
7015FSB 7016QC2X 7073SM GT70162X 70167259Y3
7015WL 7016QC3X 7073LX HS7015 7016726073
7015XLFSB 7016SP 70732X HS70152X 7016XL59RY
7015XLWL 7016XLPC 70733X SC7015 70162X59RY
7016 7016XLSP DS7016 SC7016 70177259
7016XS 7017 DS7016XL SC70162X
7016XL 7017XL DS70162X SS7015
70162X 70172X DS70163X 70157253
Tradesman Full Body Harnesses and Combinations – Rated 425 lbs.
7006 7008XL 7008QC 7010XXL 7079XL
7006XL 7008XX 7009 7010FD BV7006UT
7006XXL 70083X 7009XL 7078SM 7006082D
70063QC 70082XQC 7009QC 7078LX 7008082D
7006XL3QC 7008CS 7009QCFD 70782X 70087259Y3
7008 7008FD 7010 7079 7008XL082D
7008XS 7008PC 7010XL 7079XS