Using bios, Power management setup – Elitegroup MS200 (V1.0) User Manual

Page 26

Using BIOS

Press to return to the main menu setting page.

Suspend Mode (S3 (STR))

Use this item to define how your system suspends. In the default, S3 (STR), the
suspendmode is suspend to RAM, i.e., the system shuts down with the exception of a
refresh currentto the system memory.

Deep Power Off Mode (Disabled)

This item allows you to enable/disable the USB device wakeup function from S3/S4
mode.

Power On by RTC Alarm (Disabled)

The system can be turned off with a software command. If you enable this item, the
systemcan automatically resume at a fixed time based on the system¡¯ RTC (realtime
clock). Usethe items below this one to set the date and time of the wake-up alarm.
You must use an ATXpower supply in order to use this feature.

Power Management Setup

This page sets up some parameters for system power management operation.

Enable/Disable
ACPI support for
Operating System.

Enable: If OS
Supports ACPI

Disable: If OS
does not support
ACPI.

Power Management Setup

ACPI Aware O/S (Yes)

This item supports ACPI (Advanced Configuration and Power management Inter-
face). Use this item to enable or disable the ACPI feature.

Help Item

ACPI Aware O/S

Yes

Suspend mode

S3 (STR)

Deep Power Off Mode

Enabled

Power On by RTC Alarm

Disabled

Power On by PCIE Devices

Disabled

Wake Up by USB KB/Mouse

Enabled

Restore On AC Power Loss

Last State

Power On by PCIE Devices (Disabled)

The system can be turned off with a software command. If you enable this item, the
systemcan automatically resume if there is an incoming call on the PCIE LAN card.
You must usean ATX power supply in order to use this feature. Use this item to do
wake-up action ifinserting the PCIE card.

: Move

F10: Save ESC: Exit

+/-/: Value

Enter : Select

F9: Optimized Defaults

F1:General Help

mnlk

F7: Previous Values

F8: Fail-Safe Defaults

Wake Up by USB KB/Mouse (Enabled)

This item enables or disables you to allow keyboard or mouse activity to awaken the
systemfrom power saving mode.

Restore On AC Power Loss (Last State)

This item defines how the system will act after AC power loss during system
operation.When you set to Off, it will keep the system in Off state until the power
button is pressed.