Using bios, Integrated peripherals – Elitegroup MS200 (V1.0) User Manual
Page 25
18
Using BIOS
Integrated Peripherals
This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
Integrated Peripherals
Onboard SATA Controller
Enabled
Onboard SATA Mode
Native IDE
Onboard USB Controller
Enabled
Legacy USB Support
Enabled
Onboard Audio Controller
Enabled
Onboard LAN Controller
Enabled
Onboard LAN Option ROM
Disabled
Disabled
Enabled
Help Item
Onboard SATA Controller (Enabled)
This item allows you to enable or disable the onboard SATA controller.
Onboard SATA Mode (Native IDE)
Use this item to select the mode of the Serial ATA.
Onboard USB Controller (Enabled)
Enables or disables the onboard USB controller. We recommend users keep the
default value. Disabling it might cause the USB devices not to work properly.
Options
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices.
Press
: Move
F10: Save ESC: Exit
+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
mnlk
F7: Previous Values
F8: Fail-Safe Defaults
Onboard LAN Controller (Enabled)
This option allows you to control the onboard LAN device.
Onboard LAN Option ROM (Disabled)
This item enables or disables the onboard LAN option ROM function.