Elitegroup EZ-Buddie2 D21 I4-3 Install v.3 User Manual
Page 6

6
D. Push the clips in the arrow
direction to remove them
E. After removing the clips on both
sides, pull up the hest pipe at a 30
degree angle.
F. There is a piece of black pad on top of
the CPU. Please remove and dispose
the pad.
G. Pull the CPU level upward
and then rightward.
H. Align and insert the CPU pins into the
socket. The fool-proof is on the upper right
corner.
I. Apply some cooling gel evenly on
the top of the CPU and then reinstall
the heat pipe.
J. Reinstall the fan.
K. Fix with the clips.
L. Plug the fan power cord back to the
mainboard.
M. Screw the four screws to complete this CPU and heat sink device
installation.