Elitegroup L51RI v.4 - Manual (Page 5)

■ chapter 4 upgrading your computer
4-5
7. Locate and remove 4 Screw C’s from the HDD module.
Remove the metal case.
8. Re-attach the metal cover to the new hard drive and
tighten 4 Screw C’s.
9. Re-attach the HDD module to the HDD connector. And
re-attach 2 Screw B’s.
10. Put the System Device Cover back and re-attach 9
Screw A’s.
Congratulations! You have now completed the hard drive