Elitegroup L373N1 v.4 - Manual (Page 8)

¦ chapter 2 bios setup and security feature
2-8
Silent Boot
Screen Disabled
Enabled Choose Enabled to not show the
hardware configuration table during
boot-up.
Password
Check Setup
Always [Setup]:
To enable the password check function
every time when BIOS Setup is
executed.
[Always]:
To enable the password check function
every time the system boots.
Note: If you select Intel UNDI (Ethernet), the system will attempt to boot from the
network.
Power Management Setup
Item Selections /
Sub-menu Description
Power Button
Function On/Off
Suspend [On/Off]: Turn off the system when the
power button is pressed.
[Suspend]: Put the system in suspend
mode when the power button is pressed.
Note: The Suspend Mode selection in BIOS only applies to older Windows version
(such as Windows 3.1 or Windows 95 or NT4) or non-Windows operating system. In
Windows ME / 98SE / 2000 / XP, suspend mode and settings are determined by
settings in the Power Options Properties (Start > Control Panel > Power Options).