Elitegroup L373N1 v.4 - Manual (Page 7)

¦ chapter 2 bios setup and security feature
2-7
surface where write pre-compensation begins.
Sec The number of sectors per cylinder.
MFM drives have 17 sectors per cylinder. RLL drives
have 26 sectors per cylinder. ESDI drives have 34
sectors per cylinder. SCSI and IDE drives have even
more sectors per cylinder.
Note:
AMIBIOS automatically sets IDE drive parameters. If you set it to “USER” you
will need to manually enter the MFM, ESDI, or DLL drive parameters. Select “Not
Installed” for SCSI Drive. Choose “DROM” option for ATAPI CD-ROM drive.
Advanced CMOS Setup
Item Selections /
Sub-menu Description
1st Boot
Device Set the type of device for the 1st drive
BIOS attempts to boot from. (Note: IDE-0
is the hard disk drive.) If Intel UNDI
(Ethernet) is selected, system will
attempt to load boot sector from the
Ethernet port.
2nd Boot
Device Set the type of device for the 2nd drive
BIOS attempts to boot from.
3rd Boot
Device
Disabled
IDE-0
Floppy
CD/DVD
Intel UNDI
Set the type of device for the 3rd drive
BIOS attempts to boot from.