Elitegroup L373N1 v.3 - Manual (Page 9)

¦ chapter 1 getting to know the basics
1-9
increase system memory. Go to Chapter 3 to learn how to install
additional DIMM module.
4. Multi-Drive Bay
Depending on the factory-installed option, this bay may contain
CD-ROM, CD-RW, Floppy Disk Drive, or Card Reader (which
supports Compact Flash, MicroDrive, SD Memory, Memory Stick.)
5. Power Jack (DC-in)
The DC-out jack of the AC Adapter connects here and powers the
computer.
6. Ventilation Grill
The fan grill is where hot air is vented. Do not block this airway
completely.
7. Stand With a Tilt-able Head
The stand supports the computer. The stand also features a
tilt-able mechanism that allows you to tilt the computer to a
comfortable viewing angle.
8. PS/2 Keyboard / Mouse Port
The PS/2 port is where you connect a keyboard or mouse.
9. Firewire / IEEE1394 Port
You may connect any Fire-wire-ready device to this port. The 4-pin
IEEE1394 connector does not provide power to the attached
device; this port is for data transfer only.