Elitegroup P50CA v.4 User Manual

Page 9

■ chapter 4 upgrading your computer

4-9

into the receiving socket.

Pivot the DIMM until the latches on both sides of the

socket snap into place.

Note:

Notice the notch on the DIMM. The notches should fit nicely with the

socket.

Put the System Device Cover back and tighten 9 Screw

D’s.

Congratulations! You have just completed the memory upgrade.

When you boot up the computer, you should expect to see an

increase in DRAM capacity.

Note:

Your computer has been tested with a wide range of DIMM on the

market. However, not all memory modules are compatible. Check with your

system vendor for a list of compatible DIMM for your computer.