Elitegroup G322 - Manual (Page 55)

47
H OW DO I EXPAND MY N OTEBOOK
Upgrading your Memory
Refer to the following instructions and illustration for information on
upgrading your notebook's memory.
1.
Turn off the computer and disconnect the AC adapter and all
peripherals.
2. Turn the notebook over so that the rear ports are facing you and
locate the memory module compartment.
3. Remove the screws that secure the RAM module compartment cover
and set it aside in a safe place.
4. Remove the compartment cover and then angling it up and out.
5. If you need to install a higher capacity module, gently push the edge
clips on both sides to release the module. Angle the card slightly
upward and gently slide it from its edge connector slot. Store the
card in the anti-static bag that contains your new module(s).