Pc card / pcmcia problems – Elitegroup P53IN v.5 User Manual
Page 14
■ chapter 5 trouble shooting
PC Card / PCMCIA Problems
Note:
Some system may not have the PC Card Slot option.
5-14
PC Cards do not function
Make sure you have properly installed the driver for the
card.
Consult the card’s manual or contact the vendor for
trouble-shooting.
The PC card cannot be recognized -
Windows NT4.0 does not support PCMCIA (PC Card)
function. You may need an external program for this.
Make sure the card is fully inserted; the outer end of the
card should be even with the edge of the computer.
Remove and insert the PC card again.
Make sure there is no IRQ conflict with the card. See
Windows on-line help for solving IRQ conflicts.
Reboot the computer and see if the problem persists.
The card may be defective. Try the card on another
system, if possible.
Windows crashes or freezes when you remove the PC
card-
Make sure you have clicked
PC card. Double-click the Safely Remove Hardware icon at the
lower right corner of the task bar and select the card you wish
to stop. When you click
remove the card a few seconds later.