Elitegroup 321 - Manual (Page 11)

• All components of the cord set must bear a “PSE” or
“ T ” mark and registration number in accordance
with the Japanese Dentori Law.
• The minimum specifications for the flexible cord
are .75m ㎡ conductors.
C. For Other Countries:
• The cord set fittings must bear the certification mark
of the agency responsible for evaluation in a specific
country.
• The flexible cord must be of a HAR (harmonized)
type H03VV-F.
• The cord set must have a current capacity of a least
2.5 Amperes and voltage rating of 125 or 250 Vac.
18.
19.
20.
21.
When using your telephone equipment, basic safety
precautions should always be followed to reduce the risk of fire,
electric shock and injury to persons. These precautions
includes the following:
• Do not use this product near water, for example, near
a bathtub, washbowl, kitchen sink or laundry tub, in a
wet basement or near a swimming pool.
• Avoid using a telephone (other than a cordless type)
during an electrical storm. There may be a remote
risk of electric shock from lightning.
• Do not use the telephone to report a gas leak in the
vicinity of the leak.
• Use only the power cord indicated in this manual.
Do not use the AC adapter near open water or other liquids.
Never spill liquid into the AC adapter.
Laser Warning: Laser Class I Product Caution - Invisible laser
radiation when open avoid exposure to beam.
Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the
manufacturer's instructions. Never remove the battery pack
while the power is on as this may result in data loss when the
system loses power.
3