Elitegroup 755IN v.4 - Manual (Page 7)

■ ■ ■ ■ chapter 4 upgrading your computer
4-7
Installing a memory module (DIMM) into the system
To install the DIMM, do the following:
To replace the hard disk drive, do the following:
1.
Turn OFF the computer. Unhook the AC cord and all
cables/devices attached to the notebook.
2.
Place your hand on a large metal object momentarily to
discharge any static electricity.
3.
Locate and remove 3 Screw A’s on the System Device
Cover.
4. Remove the System Device Cover.