Elitegroup 755IN v.4 - Manual (Page 10)

■ ■ ■ ■ chapter 4 upgrading your computer
4-10
Note:
Notice the notch on the DIMM. The notches should fit nicely with the
socket.
7. Replace the System Device Cover and tighten Screw A’s.
Congratulations! You have just completed the memory upgrade.
When you boot up the computer, you should expect to see the
new DRAM capacity.
Note:
Your computer has been tested with a wide range of DIMM on the
market. However, not all memory modules are compatible. Check with your
system vendor for a list of compatible DIMM for your computer.