Elitegroup S20II1 - Manual (Page 65)

57
PC Cards do not function-
• Make sure you have properly installed the driver for the card.
• Consult the card’s manual or contact the vendor for trouble-
shooting.
The PC card cannot be recognized -
• Make sure the card is fully inserted; the outer end of the card
should be even with the edge of the computer.
• Remove and insert the PC card again.
• Make sure there is no IRQ conflict with the card. See Windows
on-line help for solving IRQ conflicts.
• Reboot the computer and see if the problem persists.
• The card may be defective. Try the card on another system, if
possible.
Windows crashes or freezes when you remove the PC card-
• Make sure you have the PC card before removing it.
Double-click the Safely Remove Hardware icon at the lower
right corner of the task bar and select the card you wish to stop.
When you click , in few seconds Windows will prompt
you to remove the card.
Performance Problems
The computer becomes hot -
• In a 35 o C environment, the certain areas of the computer’s
back case are expected to reach 50 degrees.
• Make sure the air vents are not blocked.
• If the fan does not seem to be working at high temperature (50
degrees Celsius and up), contact the service center.
• Certain programs that are processor-intensive may increase
the computer temperature to a degree where the computer
automatically slows down its CPU clock to protect itself from
thermal damage.
The program appears stopped or runs very slowly -
• Press CTRL+ALT+DEL to see if an application is still
responding.
• Restart the computer.