Davey Compact Series Underwater Pool Lights - Manual (Page 6)

Coloured clip on lens replacement -
Your coloured clip on lens can be easily changed without the need to bring the light to the
surface.
By pushing down and squeezing in at the same time at the top of the light, will release the
lens and then simply twist the bottom to release the bottom clip. The new colour lens
should be located in the bottom clip, and then push the top clips into position.
NOTE: Davey recommends that the light be inspected and maintained annually for
maximum performance and life span.
The light and lens “O” ring in particular are designed as a dry sealing unit. Therefore the
use of sealing agent/compound is not necessary. Under no circumstances should
petroleum based agent be used, e.g. Vaseline, as this will deteriorate the O ring. If an
agent is to be used then a silicone based material is recommended, e.g. Silicone spray.
Coloured Clip On Lens Replacements
Colour Model #
MS4600670 Blue
MS4600671 Red
MS4600672 Green
MS4600673 Amber