Burcam 300503R UTILITY SUBMERSIBLE PUMP 1/4HP 115V ELECTRONIC SWITCH - Manual (Page 2)

FOR INFORMATION TEL: 514.337.4415 FAX: 514.337.4029
SAFETY INSTRUCTIONS:
This fine pump that you have just purchased is designed from the latest in material and
workmanship.
Before installation and operation, we recommend the following procedures:
CHECK WITH YOUR LOCAL ELECTRICAL AND PLUMBING CODES TO
ENSURE YOU COMPLY WITH THE REGULATIONS. THESE CODES HAVE
BEEN DESIGNED WITH YOUR SAFETY IN MIND. BE SURE YOU COMPLY
WITH THEM.
WE RECOMMEND THAT A SEPARATE CIRCUIT BE LEAD FROM THE HOME
ELECTRICAL DISTRIBUTION PANEL PROPERLY PROTECTED WITH A
FUSE OR A CIRCUIT BREAKER. WE ALSO RECOMMEND THAT A GROUND
FAULT CIRCUIT BE USED. CONSULT A LICENSED ELECTRICIAN FOR ALL
WIRING.
THE GROUND TERMINAL ON THE THREE PRONG PLUGS SHOULD
NEVER BE REMOVED. THEY ARE SUPPLIED AND DESIGNED FOR YOUR
PROTECTION.
NEVER MAKE ADJUSTMENTS TO ANY ELECTRICAL APPLIANCE OR
PRODUCT WITH THE POWER CONNECTED. DO NOT ONLY UNSCREW
THE FUSE OR TRIP THE BREAKER, REMOVE THE POWER PLUG FROM
THE RECEPTACLE.
A
B
C
D
2
tAPPLICATION
R
This submersible utility pump is designed
for a portable application.
R Can also be used for mini fountains.
R This pump is ideal for water transfer
from basin, pool cover, flodded floor,
flat roof.
R CAPACITY:
5 1525 US GPH
10’ 1270 US GPH
15 1000 US GPH
20’ 525 US GPH
25’ 200 US GPH
FEATURES
R Non corrosive material.
R Stainless steel mechanical rotary seal.
R Thermal and overload protection.
R 1/4HP, 115VAC, 60Hz, 1.6A, 3A (when start).
FRICTION LOSS
IN
PIPE NOT
INCLUDED
NOTICE
This unit is not designed for applications
involving salt water or brine .
Use with salt water or brine will void
warranty.