ReadyLIFT Ford F550 Super Duty 4WD, 2005-2013 - Radius Arm Kit - Manual (Page 4)

Lower vehicle onto it’s own weight and
torque radius arms hardware to spec
and set alignment cams to neutral posi-
tion. Test drive and have vehicle
aligned.
www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions (44-2002)
Use assembly lube to install urethane bushings Lube pivot pin and install into bushings
Install new assembled radius arm w/ OE bolts at top Install new offset cams/bolts/nuts into front lower mount
Raise radius arm into frame, attach w/ OE hardware Install provided zerk fittings and reconnect ABS/vacuum lines