ReadyLIFT Ford F350 Super Duty 4WD, 2011-2014 - 5 Lift Kit - Series 3" User Manual
Page 7
www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 49-2000, 49-2001, 49-2002
7
Revised Feb‐14
Install new drop pitman arm w/OE nut and torque to spec.
Remove front foam bump stops from frame
Remove bump stop cup mount from frame
Screw bump stop drop bracket into OE frame location
Reinstall/align OE bump stop cups onto drop bracket
Install new track bar drop bracket w/ OE fasteners, torque
Carefully lift vehicle enough to install new coil springs
Lower vehicle down onto new springs and allow to settle
Reuse OE isolator
This manual is related to the following products:
- Ford F350 Super Duty 4WD, 2011-2014 - 5 Lift Kit - Series 2" Ford F350 Super Duty 4WD, 2011-2014 - 5 Lift Kit - Series 1" Ford F250 Super Duty 4WD, 2011-2014 - 5 Lift Kit - Series 3" Ford F250 Super Duty 4WD, 2011-2014 - 5 Lift Kit - Series 2" Ford F250 Super Duty 4WD, 2011-2014 - 5 Lift Kit - Series 1"