beautypg.com

ReadyLIFT Toyota Tundra, 2007-2014 - Mid-Travel Uniball Upper Control Arm Kit User Manual

Page 4

background image

www.ReadyLIFT.com

Phone (702)410-2300

Installation Instructions (OFF-Road Series 44-XXXX UCA kits)

Install Urethane bushings into UCA,

DO NOT use lube here.

Apply lube to inside of pivot sleeve and insert pivot tube

Install zerk fittings

Insert machined tapered pin into spindle and tighten to spec

Install new UCA into frame and attach with OE hardware

Place

upper (sm)/

lower (lg)

misalignment spacers into uniball

Slide UCA w/ misalign spacers onto tapered pin in spindle

Raise suspension, if necessary, to attach UCA hardware

Pin taper must sit flush/below hole in spindle