ReadyLIFT Z-71 Off Road GMC Sierra 1500 SST Lift Kit, 2014-UP 4WD, 2.25F/1.75"R w/ Uniball Control Arms" - Manual (Page 7)

www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 69-3447
7
Revised Feb-2014
Reinstall OEM hardware into is original
location noting original direction of cam bolts
and marks done at when you removed them.
(The plastic OEM Cam locks must be removed
for the vehicle to be aligned properly).
29-1 Install ReadyLIFT® Uni-Ball Control Arm.
29.
Install the pin into the spindle.
Add a washer and a standard nut. Tighten down to seat the pin.
34-1. 34-2.
Note: Steps
34-1 to 34-
8 are the
same for
aluminum
or steel
suspension.
Install strut with spacer leaving nuts loose. Install the lower strut spacer using factory hardware and torque.
Lower strut and spacer properly installed. Once the lower is tightened, torque the top nuts.
30. 31.
33. 32.