ReadyLIFT Z-71 Off Road GMC Sierra 1500 SST Lift Kit, 2014-UP 4WD, 2.25F/1.75"R w/ Uniball Control Arms" - Manual (Page 3)

www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 69-3447
3
Revised Feb-2014
The Bill of Materials represents the component contents of this kit. All hardware is of the highest grade
and the components are manufactured to exacting specifications for a trouble free installation. Use the
attached torque specifications chart when final tightening of the nut and bolts are done.
Bill of Materials
Description Qty
Uni‐Ball Upper Control Arm Kit 1
M6 Flat Washer (UCA) 2
M6 Nyloc Nut (UCA) 2
UCA Bushing Kit w/Washer & Grease 1
Aluminum Upper Strut Extension 2
Aluminum Lower Strut Extension 2
M10‐1.25 Serrated Flange Nuts 6
M10 Flat Washer 8
M10‐1.50 Stover Nut 4
Diff Drop Spacer Front .955" Tall 2
Diff Drop Spacer Rear .750" Tall 2
M12‐1.25 x 120mm 4
Place vehicle on level ground. Raise vehicle and support vehicle to perform work.
Disconnect battery connections. Remove plastic air dam.
Description Qty
M12‐1.25 Stover Nut 4
M12 Washers 8
Front Differential Skid Plate 1
3" Block and U‐bolt Kit 1
Rear Shock Extension 2
M14‐2.0 x 75mm Hex Head Bolt 10.9 2
M14‐2.0 C‐Lock Nut 2
M14 Washers 4
8" Zip Ties 4
M6‐1.25x20mm Skid Plate Bolt 1
M6‐1.25 Nut 1
Skid Plate Washer Large OD 7mm ID 2
2. 1.
4. 3.