Nematron iPC-Fanless Series with N2800 CPU User Manual
Page 4
________________________________________________________________________________________
Document No. DOC-IPC-003,
User Manual iPC-Series & nPC300, Rev B Rel. 12-2013
Page 4 of 24
Specifications
Front Panels
The iPC series has NEMA 4/4X/12 sealed front panels when mounted in an appropriate NEMA rated
enclosure. The front panels and required cutouts are exactly the same as the appropriate size ePC-Series or
M-Series units for easy migration to the iPC-Series from the other units See Chapter 2 for more details on
installation and selection of an appropriate enclosure. All four sizes have very similar front panels with
different dimensions.
Figure 1.0: iPC Series Front Panel Comparison
The standard front panels are powder coated aluminum. The optional Stainless Steel front panel is type 304
and will not contain a logo pocket or logo on the front. The window area is clear polycarbonate when ordered
without a touchscreen. The touchscreen option is chemically strengthened glass covered by a polyester
overlay. The polyester overlay has better resistance to chemicals than the polycarbonate window. Depending
on the chemicals involved in your application consideration should be given to choosing the proper window
material. In addition there is a Rack Mount front panel option for the i
PC1900 (19” unit) only. This front panel
is powder coated aluminum and is 9U high with four rack mount spaced counter-bored mounting holes on each
side of the panel. This panel is not NEMA sealed when installed.