PreSonus VXP - Manual (Page 24)

CONTROLS & CONNECTIONS
22
footsteps or other types of vibrations from being transmitted through the
microphone stand into the microphone.
2 . 7 M A S T E R
PEAK LIMIT This control adjusts the operating parameters of the Peak
limiter. This device is variable allowing the user to select a point from 0
dBu to +24 dBu. The set point is the point that a signal being processed
will not be allowed to go above. This feature, sometimes referred to as a
“Brick Wall Limiter”, is extremely useful for preventing overloading which is
especially vexing when encountered while recording with digital recording
media.
LEVEL: This control adjusts the output level of the VXP. It functions as a
master fader for the entire processing strip. It is useful for adjusting the
overall output level up or down to match the optimum input level of a
recorder, mixer, etc.
POWER: A lighted push button is located on the front panel for turning the
VXP On and Off.
2 . 4 B A C K P A N E L B A S I C L A Y O U T
PIN 1 GND
PIN 2 High (+)
PIN 3 Low (-)
Cable Wiring Diagram for Input and Output XLR
The Output XLR Connector is servo balanced and operates at +4dBu.